Table of Contents
Advertisement
Mounting the projector
If you intend to mount your projector, we strongly recommend that you use a proper fitting B enQ
projector mounting kit and that you ensure it is securely and safely installed.
If you use a non-B enQ brand projector mounting kit, there is a safety risk that the projector may fall
down due to an improper attachment through the use of the wrong gauge or length screws.
Before mounting the projector
• Purchase a B enQ projector mounting kit from the place you purchased your B enQ projector.
• B enQ recommends that you also purchase a separate Kensington lock compatible security cable and
attach it securely to both the Kensington lock slot on the projector and the base of the mounting
bracket. This will perform the secondary role of restraining the projector should its attachment to the
mounting bracket become loose.
• Ask your dealer to install the projector for you. Installing the projector on your own may cause it to
fall and result in injury.
• Take necessary procedures to prevent the projector from falling off such as during an earthquake.
• The warranty doesn' t cover any product damage caused by mounting the projector with a non-B enQ
brand projector mounting kit.
• Consider the surrounding temperature where the projector is ceiling/wall mounted. If a heater is used,
the temperature around the ceiling/wall may be higher than expected.
• Read the user manual for the mounting kit about the range of torque. Tightening with torque
exceeding the recommended range may cause damage to the projector and subsequently falling off.
• M ake sure the power outlet is at an accessible height so that you can easily shut down the projector.
Ceiling/Wall mount installation diagram
Ceiling/Wall mount screw: M 4
(M ax L = 25 mm; M in L = 20 mm)
339.5
242.0
216.8
228.0
Unit: mm
Positioning your projector
15
Advertisement
Table of Contents
