Dell Precision 7865 Tower Service Manual page 105

Table 10. System setup options—Power menu (continued)
Power
Enable Advanced Battery Charge
Configuration
Peak Shift
Enable Peak Shift
Thermal Management
USB Wake Support
Enable USB Wake Support
Wake on Dell USB-C Dock
Block Sleep
Lid Switch
Enabled Lid Switch
Power On Lid Open
Intel Speed Shift Technology
Table 11. System setup options—Security menu
Security
TPM 2.0 Security
TPM 2.0 Security On
Attestation Enable
Key Storage Enable
Enable or disable the advanced battery charge configuration.
By default, the Enable Advanced Battery Charge Configuration option is
disabled.
Enables the system to run on battery during peak power usage hours.
By default, the Enable Peak Shift option is disabled.
Enables to cool the fan and processor heat management to adjust the system
performance, noise, and temperature.
By default, the Optimized option is enabled.
When enabled, the USB devices like a mouse or keyboard can be used to wake
the system from Standby, Hibernate, and Power Off.
NOTE: This feature requires Deep Sleep Control to be disabled.
NOTE: This feature is only functional when the AC power adapter is
connected. If the AC power adapter is removed before Standby, the BIOS
will remove power from all of the USB ports to conserve battery power.
By default, the Enable USB Wake Support option is disabled.
When enabled, connecting a Dell USB-C Dock will wake the system from
Standby, Hibernate, and Power Off.
By default, the Wake on Dell USB-C Dock option is enabled.
Enables to block entering sleep (S3) mode in the operating system.
By default, the Block Sleep option is disabled.
Enable or disable the lid switch.
By default, the Enable Lid Switch option is enabled.
When enabled, allows the system to power up from the off state whenever the
lid is opened.
By default, the Power On Lid Open option is enabled.
Enable or disable the Intel speed shift technology support.
By default, the Intel Speed Shift Technology option is enabled.
Allows you to enable or disable TPM visibility to operating system.
By default, the TPM 2.0 Security On option is enabled.
Enables to control whether the Trusted Platform Module (TPM) Endorsement
Hierarchy is available to the operating system.
By default, the Attestation Enable option is enabled.
Enables to control whether the Trusted Platform Module (TPM) Storage
Hierarchy is available to the operating system.
By default, the Key Storage Enable option is enabled.
BIOS setup 105