Removing The Ultraspeed Duo Card - Dell Precision 7865 Tower Service Manual

Steps
1. Align the powered GPU with the PCI-Express card connector on the system board.
2. Using the alignment post, connect the graphics card to the connector and press down firmly. Ensure that the graphics card
is firmly seated.
3. Close the PCIe door.
Next steps
1. Install the air shroud.
2. Install the side cover.
3. Follow the procedure in

Removing the UltraSpeed Duo card

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the air shroud.
About this task
The following images indicate the location of the UltraSpeed Duo card and provide a visual representation of the removal
procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 69