Mitsubishi Electric PUMY-P36NKMU3 Technical & Service Manual page 142

OPERATING PROCEDURE
15. Removing the reactor (DCL)
(1) Remove the service panel. (See Photo 1)
(2) Remove the top panel. (See Photo 1)
(3) Remove the electrical parts box (See photo 5)
(4) Remove 6 screws (4 x 10) for reactors to remove the reac-
tors. (See Figure 3)
OCH733
PHOTOS/FIGURES
Figure 3
Screws for
reactors
142
Reactors