Changing Procedure Of The Various Settings - JUKI MO-6000 Series Instruction Manual

5. Changing procedure of the various settings

Refer to " @ -4. Various settings of the chain-off thread rolling-in sewing " , and check the change mode
of the item to be changed.
Changing procedure of the respective modes is as described below.
(1) Changing procedure under the users' mode
6 7
1 2
10
1)
2)
5
3)
4)
Turn OFF the power.
switch 5, turn ON the power.
Pressing
Indication 6, 7 will be shown on the display. (If
the indication fails to change, re-perform the pro-
cedures 1) and 2).
The last number and the data you have set are
displayed.
When you want to advance the setting No., press
switch 2 to advance the setting No.
When you want to return the setting No., press
switch 1 to return the setting No.
switch 1 (
When
pressing, the setting No. will return (will
advance) continuously. When the setting
No. is advanced (returned), the contents
which are before by one (after by one) will
be determined. So, be careful when chang-
ing the contents (up/down switch is
touched).
switch 2 ) is held