Installing The Presser Lifting Unit - JUKI MO-6000 Series Instruction Manual

2. Installing the presser lifting unit

WARNING :
To protect against personal injury due to abrupt start of the machine, conduct maintenance works with
the power turned off.
2
1
1
(1) Installing the presser lifting cylinder
1)
3
2)
5
3)
4)
4
(2) Installing components to the machine
6
1)
7
Attach roller 2 and pin 3 to cylinder knuckle 1
and fix pin 3 with two C rings.
Screw in cylinder knuckle 1 to the top end of the
cylinder rod.
The position of cylinder knuckle 1 is adjusted
after installing the cylinder on the machine head.
So, place it in an appropriate position.
Do not fix lock nut 4 here.
Assemble presser lifting cylinder couple 5.
head
Fix presser lifting cylinder mounting base 6 in
thecenter of the slot with screws 7.
27