Installation Of Components To The Sewing Machine Head; Installing The Thread Tension Total Asm. (Thread Release Unit) - JUKI MO-6000 Series Instruction Manual

SC-510
Presser lifting
solenoid valve
Tension release
solenoid valve
Intermediate latch drive
solenoid valve
% . INSTALLATION OF COMPONENTS TO THE SEWING
MACHINE HEAD

1. Installing the thread tension total asm. (thread release unit)

WARNING :
To protect against personal injury due to abrupt start of the machine, conduct maintenance works with
the power turned off.
Remove once the thread tension attached to the sewing machine and install the thread tension total asm.
on the upper cover.
26
(4) Installing the various solenoid valves
on the machine table
Fix the solenoid valves near the side of the motor lo-
cated on the rear face of the table with wood screws
1.
1