4-Port Ds3 Fr Fp Cable Assemblies - Nortel Passport 15000 Hardware Description

168 Chapter 4 Control and function processors

4-port DS3 FR FP cable assemblies

241-1501-200 5.2S2
The maximum cable distance for DS3 lines to customer premises equipment
(CPE) is 137 m (450 ft). The distance between the FP and the termination
panel is part of the total length.
The table "Cable assemblies for a 4-port DS3 FR FP" (page 168) lists the
available prefabricated cables.
Table 29
Cable assemblies for a 4-port DS3 FR FP
PEC Description
NTHR58 DS3 male 8W8 mini-coax to male BNC
NTHR59 DS3 male 8W8 mini-coax to male BNC
NTHR60 DS3 male 8W8 mini-coax to male BNC
NTHR72 DS3 male 8W8-to-8W8 male mini-coax
NTHR73 DS3 male 8W8-to-8W8 male mini-coax
NTHR74 DS3 male 8W8-to-8W8 male mini-coax
NTHR69 DS3 DB9 sparing control port
NTHR70 DS3 DB9 sparing control port
NTHR71 DS3 DB9 sparing control port
You can custom make your own control port cable using the following
specifications:
• tin-plated copper cable with 5 conductors at 7 strands of 32 AWG
2
(0.0320 mm ) wire for each conductor, with an aluminum polyester
shield, covered by poly vinyl chloride insulation (for example, Beldon
Wire and Cable part number 9535)
• a resultant cable size of 24 AWG (0.205 mm
Length
2.5 m (8 ft)
5 m (16 ft)
15 m (49 ft)
2.5 m (8 ft)
5 m (16 ft)
15 m (49 ft)
2.5 m (8 ft)
5 m (16 ft)
15 m (49 ft)
2
)