Figure 88
High-density cable management bracket pair
Mounting ear for
fastening onto frame
Very high-density cable management brackets
uprights
The very high-density cable management brackets are the optional extended
cable management brackets that can be mounted to one or both sides of a
frame as shown in the figure "A NEBS 2000 frame with extended cable
management brackets and side panel brackets" (page 322). Up to four
brackets fit on each side of a frame. The bracket installation procedure
identifies where the brackets are fastened to the frame. The brackets must be
mounted onto the frame before it is anchored to the floor unless enough
unobstructed space is kept available to add the brackets later. See
241-1501-205 Passport 15000, 20000 Site Requirements and Preparation
Guide to plan the frame footprint to include space for the brackets.
Chapter 6 Cables and cable management 321
Channels for cables
Passport 15000, 20000 Hardware Description
PPT 3410 002 AA
5.2S2