Turning The Appliance Off; Menu Settings; Language; Maintenance - DeLonghi ECAM35075 Manual

Fully automatic espresso and coffee machine
Hide thumbs Also See for ECAM35075:
Table of Contents

Advertisement

After heating, the message "Rinsing" is displayed, together with
a progress bar which gradually fills as preparation proceeds. As
well as heating the boiler, the appliance also heats the internal
circuits by circulating hot water.
The appliance is ready when the message "Select your drink" is
displayed.

5. TURNING THE APPLIANCE OFF

Whenever the machine is turned off after being used to make
espresso or coffee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, hot water flows from the coffee spouts (A9).
Avoid contact with splashes of water.
To turn the appliance off, press the
6);
The message "Turning off underway Please wait" appears
on the display (B1), then the appliance performs a rinse
cycle and goes off (standby).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
first turn the appliance off by pressing the
(fig. 6);
press the main switch (A22) (fig. 2).
Important!
Never press the main switch while the appliance is on.

6. MENU SETTINGS

The menu has 6 items, some divided into subgroups:

Language;

Maintenance:

-
Descaling,
-
Install filter,
-
(if the filter is not installed): install filter
-
(if a filter has been installed): Replace filter,
-
(if a filter has been installed): Remove filter;
6
6.1 Language
To modify the language of the display (B1), proceed as follows:
1. Press
2. Press
3. Press the selection arrows (B2) and (B4) until the required
4. Press
5. The appliance goes back to the "Settings" menu;
6. Press
6.2 Maintenance
Here you can find all the maintenance operations required by
the appliance over time:
button (A7) (fig.
To select the operation you require, proceed as follows:
1. Press
2. Press the selection arrows (B2) and (B4) until "Mainte-
3. Press
4. Press the selection arrows to display the operation to be
button
5. Press

6.3 Program drinks

The appliance is set by default to automatically deliver standard
quantities. To change these quantities and customize the direct-
ly selected drinks and
1. Press
2. Press the selection arrows (B2) and (B4) until "Prg. drinks"
3. Press
4. Press the selection arrows until the drink you want to cus-
8
Prg. drinks;
Prg. My drinks;
General:
-
Set temperature,
-
Water hardness,
-
Auto-off,
-
Energy saving,
-
Beep,
-
Default drinks,
-
Default values;
Statistics.
(B6) to enter the "Settings" menu;
(B3) to select "Language". The available lan-
guages are displayed;
language is displayed between the two dotted lines;
to confirm;
(B5) to exit the menu.
Descaling: For instructions on descaling, see section "14.
Descaling".
Install filter: For instructions on how to install the filter
(C4) see section "16.1 Installing the filter".
(B6) to enter the "Settings" menu;
nance" is displayed between the two dotted lines;
(B3) to confirm;
performed;
to confirm and perform the operations as de-
scribed in the corresponding sections.
(B6) to enter the "Settings" menu;
is displayed between the two dotted lines;
(B3) to confirm: the appliance lists the drinks
you can customize;
tomize is displayed, then press
(B14), proceed as follows:
to confirm;

Advertisement

Table of Contents
loading

Table of Contents