Table of Contents
Advertisement
TV-Tuner Card Audio Connector: TVIN1
The mainboard provides the connector to connect Audio of the
TV-Tuner card. You can insert the optional TV-Tuner card into the PCI
Slot 1.
Card Reader Connector: CR1
The mainboard provides a connector to connect the Card Reader
on the Front Panel.
CPU Fan Connectors: CPUFAN1/SYSFAN1
The CPU Fan/System Fan connectors support system cooling fans
with +12V that is controlled by PWM. When connecting the wire to the
three-pin head connectors, always note that the red wire is the positive
and should be connected to the +12V (that is controlled by PWM), the
black wire is Ground and should be connected to GND.
SENSOR
L
GND
R
FAN Power
GND
SYSFAN1
Mainboard Hardware
TVIN1
CR1
SENSOR
FAN Power
GND
CPUFAN1
2-13
Advertisement
Table of Contents
