Table of Contents
Advertisement
BIOS Setup
3.8 Integrated Peripherals
USB Controller
This setting is used to enable/disable the onboard USB controller. Set-
ting options: [Disabled], [Enabled].
USB Device Legacy Support
Set to [All Device] if your need to use any USB device in the operating
system that does not support or have any USB driver installed, such as
DOS and SCO Unix. Set to [No Mice] only if you want to use any USB
device other than the USB mouse. Setting options: [Disabled], [All
Device], [No Mice].
OnBoard LAN
This setting controls the onboard LAN device. Setting options: [Disabled],
[Enabled].
3-17
Advertisement
Table of Contents
