Table of Contents
Advertisement
Chapter 3
3.1 Entering Setup
Power on the computer and the system will start POST (Power On
Self Test) process. When the message below appears on the screen, press
<DEL> key to enter Setup.
If the message disappears before you respond and you still wish to
enter Setup, restart the system by turning it OFF and On. You may also
restart the system by simultaneously pressing <Ctrl>, <Alt>, and <Delete>
keys.
Control Keys
< >
< >
< >
< >
<Enter>
<Esc>
<-/PD>
<+/PU>
<F7>
<F6>
<F10>
3-2
Press DEL to enter SETUP
Move to the previous item
Move to the next item
Move to the item in the left hand
Move to the item in the right hand
Select the item
Jumps to the Exit menu or returns to the main
menu from a
submenu
Decrease the numeric value or make changes
Increase the numeric value or make changes
Load Fail-Safe Defaults
Load Optimal Defaults
Save all the CMOS changes and exit
Advertisement
Table of Contents
