Table of Contents
Advertisement
[Auto]
Set Wake Up Events
Press <Enter> to enter the sub-menu and the following screen appears:
Resume By RTC Alarm
This is used to enable or disable the feature of booting up the
system on a scheduled time/date from the soft off (S5) state.
Settings: [Enabled], [Disabled].
Alarm Date/Hour/Minute/Second
If Resume By Alarm is set to Enabled, the system will automati-
cally resume (boot up) on a specific date/hour/minute/second
specified in these fields. Available settings for each item are:
BIOS determines the mode automatically.
Alarm Date
Alarm Hour
Alarm Minute
Alarm Second
BIOS Setup
01 ~ 31, Every Day
00 ~ 23
00 ~ 59
00 ~ 59
3-15
Advertisement
Table of Contents
