Table of Contents
Advertisement
On-Chip Serial ATA
This setting is used to specify the SATA controller. If [Legacy
Mode] is selected, PATA and SATA will be combined. If [Native
Mode] is selected, PATA and SATA will both be enabled. Settings:
[Disabled], [Legacy Mode], [Native Mode].
Combined Mode Option
This item is available for you to select the combined mode of the
ATA controllers. Setting options: [P-ATA 1st Channel], [S-ATA 1st
Channel].
Set Super I/O
Press <Enter> to enter the sub-menu and the following screen appears:
Serial Port A
This specifies the I/O port address of Serial Port A. Selecting
[Auto] allows AMIBIOS to automatically determine the correct
base I/O port address. Settings: [Disabled], [3F8/COM1], [3E8/
COM3], [Auto].
BIOS Setup
3-19
Advertisement
Table of Contents
