Table of Contents
Advertisement
Precharge Delay
The field specifies the idle cycles before precharging an idle bank.
Settings: [8], [7], [6], [5] (clocks).
Burst Length
This setting allows you to set the size of Burst-Length for DRAM.
Bursting feature is a technique that DRAM itself predicts the ad-
dress of the next memory location to be accessed after the first
address is accessed. To use the feature, you need to define the
burst length, which is the actual length of burst plus the starting
address and allows internal address counter to properly generate
the next memory location. The bigger the size, the faster the
DRAM performance. Settings: [4], [8].
AGP Aperture Size (MB)
This setting controls just how much system RAM can be allocated to
AGP for video purposes. The aperture is a portion of the PCI memory
address range dedicated to graphics memory address space. Host cycles
that hit the aperture range are forwarded to the AGP without any
translation. The option allows the selection of an aperture size of [4MB],
[8MB], [16MB], [32MB], [64MB], [128MB], and [256MB].
VGA Share Memory Size
The system shares memory to the onboard VGA card. This setting con-
trols the exact memory size shared to the VGA card. Setting options:
[1M], [4M], [8M], [16M], [32M].
BIOS Setup
3-13
Advertisement
Table of Contents
