Table of Contents
Advertisement
Serial ATA RAID Connector: SATA1
The mainboard provides the connector to connect the hard disk of Serial
ATA interface. One Serial ATA cable is included in the package.
1
7
TV-Tuner Card Connector: CN3
The mainboard provides the connector to connect the TV-Tuner card.
You can insert the TV-Tuner card into the PCI Slot 1.
CPU/System Fan Connectors: CPUFAN1/CPUFAN2/SYSFAN1
The CPU and System Fan connectors support system cooling fans with
+12V that is controlled by PWM. When connecting the wire to the three-pin
head connectors, always note that the red wire is the positive and should be
connected to the +12V (that is controlled by PWM), the black wire is Ground
and should be connected to GND.
CPUFAN1
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
SATA1 Pin Definition
Pin
Signal
1
GND
3
TXN
5
RXN
7
GND
R
GND
L
CPUFAN2
GND
+12V
SENSOR
Introducing Mainboard
Pin
Signal
2
TXP
4
GND
6
RXP
SYSFAN1
Power
GDD
2-15
Advertisement
Table of Contents
