Delete A Waypoint From Route; Waypoint Statistics; Following A Route - Lowrance 100 Installation And Operation Instructions Manual

mark a location with the cursor that isn't a waypoint,
the unit will create a waypoint and add it to the route. To
add another location or waypoint to the route, move
the cursor to that location and press the ENT key. When
you're finished, press the EXIT key. The screen at right
appears.
The total route distance shows at the bottom of the
screen. Continue selecting waypoints until all of the way-
points in the route are on the list. Your route is now
saved in memory. Press the EXIT key to erase the menus.
Delete a Waypoint
To remove a waypoint from a route, first select the route, then select the
waypoint that you want to delete and press the right arrow key. Highlight
the "Delete" label on this menu and press the right arrow key. The unit
returns to the route list with the waypoint removed from the list. (Note:
This doesn't delete the waypoint from the database, it simply removes it
from the route.)

Waypoint Statistics

By default, this unit shows the distance and bearing from each waypoint
in the route to the next. It will also show estimated time en route (ETE),
estimated time of arrival (ETA), or the waypoint names (NAMES). To view
the different statistics, highlight the "SHOW-DIS/BRG" label, then press
the left or right arrow key until the desired statistic appears.
Following a Route - Direct To Method
Before starting the route, you'll need to decide if you want to start at the
first waypoint and travel forward to the last waypoint or start at the last
waypoint in the route and travel backwards (reverse) to the first waypoint.
The default is forward. You can also start at the closest waypoint to your
position, then travel forward or reverse through the route using the "AUTO
START" feature.
To follow a route, first select the route number that you
wish to follow by highlighting the "Route #" label, and
pressing the left or right arrow keys until the desired
route number appears. In this example we're using route
number one (shown at right). To run the route from the
last waypoint to the first, highlight the "RUN" label and
press the right arrow key to change it from forward to
reverse.
53