Yoke Mount - Lowrance 100 Installation And Operation Instructions Manual

WINDSHIELD
DASH
Moisten the suction cups and press them firmly against the inside of the
windshield, away from your line of sight. Route the antenna's cable to the
GPS receiver and it's ready for use.
YOKE MOUNTING
Included with your AirMap is a yoke
mounting bracket. It secures to the
yoke's shaft with a clamp. Fasten the
cradle packed with your unit to the
yoke mount with four 2 mm screws.
Follow the instructions included with
the yoke mount to assemble and at-
tach it to your aircraft. The AirMap sim-
ply snaps into the cradle.
The AirMap can operate from batteries or the external power cord when
it's attached to the yoke mounting bracket. To use the external power cord,
simply plug one end into the power connector on the AirMap and the
other end into the aircraft's cigarette lighter.
Some pilots like to keep
fresh batteries in their
units, even when using
the external power. If the
power fails, the unit will
automatically switch to
the batteries, thus keep-
ing the unit on without
interruption.
5