Lowrance 100 Installation And Operation Instructions Manual page 34

Place Icon - Cursor Position
To place an icon at the cursor's position, first use the arrow keys to move
the cursor to the location that you wish to place the icon. Next, press the
ENT key. Now select the icon using the arrow keys. While it's selected,
press the ENT key. The map reappears with the icon placed at the cursor
crosshairs. Press the EXIT key to erase the cursor. On the screens shown
below, the house icon was placed at the cursor's location.
MOVE CURSOR SELECT ICON ICON PLACED AT
PRESS ENT KEY PRESS ENT KEY CURSOR POS.
Icon Options
Icons can be erased from the plotter individually, all of
a specific type, or all at once. They can also simply be
turned off without erasing them. To make changes to
the icons, press the MENU key, then select "MAP
SETUP", and finally select "ICON OPTIONS". The
screen shown at right appears.
The first menu (ICONS OFF/ON) simply turns all icon
symbols off or on. This doesn't erase the icons, it sim-
ply "hides" the icons from the map. You can use this
feature to temporarily de-clutter the display.
The DEL ALL ICONS selection does erase all of the icons from memory,
Use this only if you want to erase all icons that have been placed on all
map screens.
To erase only a certain type of icon, select the DEL ICON TYPE menu.
The icon menu appears. Highlight the icon style that you want to erase
from memory, then press the ENT key. The unit returns to the map screen
with only the selected icons erased.
28