Lowrance 100 Installation And Operation Instructions Manual page 47

This is the communication frequencies screen. In this
example, all applicable com frequencies for Fort Smith
Regional airport are shown. Also, this airport has more
frequencies that can be shown on one page. Press the
left or right arrow keys to view the rest of the radio
information. When you're finished with this screen, press
the EXIT key. The unit returns to the previous data-
base screen.
Runways
To view the runway information, press the down arrow
key on the airport database screen shown at the bot-
tom of the previous page until the black box is on the
"RUNWAYS" label, then press the right arrow key. A
screen similar to the one at right appears.
The active runways available at the time of your data-
base are shown in the center of the screen. Data for
each runway is shown at the top and bottom of the
screen. In the example screen shown above, runway 7
- 25 has a hard surface, is 8000 feet long and 150 feet
wide. It also has lights which are activated on 118.30
mHz.
To view the data for the other runway, press either the
right or left arrow key. The screen shown at right ap-
pears. Now information for runway 1 - 19 is shown.
If the airport has more than two runways, simply keep
pressing the right or left arrow keys until the desired
runway appears.
When you're finished with this screen, press the EXIT
key to return to the airport database screen.
Services
To view the services available at the airport, highlight
the "SERVICES" label on the AIRPORT main menu
shown at the bottom of the previous page, then press
the right arrow key. The screen at right shows. After
viewing the information, press the EXIT key.
41