Lowrance 100 Installation And Operation Instructions Manual page 58

Add From Waypoint List
This screen is virtually identical to the database screen Select a user
waypoint, airport, VOR, NDB, or intersection. You can select a user way-
point either by using the waypoint number, waypoint name, or from the
waypoint list. After selecting the waypoint, highlight the "ADD TO ROUTE"
label and press the right arrow key. The unit returns to the route screen
with the first waypoint at the top of the list. Highlight the next waypoint
location beneath the first waypoint and press the right arrow key. Now
repeat the previous steps to select the second waypoint for your route.
After selecting the second waypoint, the unit returns to the waypoint list
screen. The second waypoint shows beneath the first one, with bearing
and distance from the first waypoint in the route to the second showing
under the second waypoint's name.
SELECT FIRST
WAYPOINT AND ADD
TO ROUTE
Add From Map
You can add waypoints from the map, even create new ones. To do this,
select "ADD FROM MAP" from the menu as shown below left. A screen
similar to the one below center appears. Using the arrow keys, move the
cursor to the desired waypoint or location. Now press the ENT key to add
it to the route. If it's an existing waypoint, it will be added to the route. If you
UNIT RETURNS TO
ROUTE PAGE
52
REPEAT UNTIL
ALL WAYPOINTS
ARE IN ROUTE