Table of Contents
Advertisement
Compliance Mode
The optional settings: [Disabled]; [Enabled].
Onboard PCIE LAN1
The optional settings: [Disabled]; [Enabled].
Onboard PCIE LAN2
The optional settings: [Disabled]; [Enabled].
SATA Configuration
Press [Enter] to make settings for the following sub-items:
SATA Controller
Use this item to enable or disable the Chipset SATA Controller. The Chipset SATA
controller supports the 2 blank internal SATA ports (up to 3Gb/s supported per port).
The optional settings are: [Enabled]; [Disabled].
When set as [Enabled], user can make further settings in the following sub-items:
SATA Mode Selection
Use this item to determine how SATA controller(s) operate.
The default setting is: [AHCI].
SATA Port
SATA Port
Use this item to enable or disable SATA port.
The optional settings: [Disabled]; [Enabled].
M.2
M.2
Use this item to enable or disable SATA port.
The optional settings: [Disabled]; [Enabled].
HD-Audio Support
Use this item to enable or disable HD-Audio Support.
The optional settings are: [Disabled]; [Enabled].
SCC eMMC Support
Use this item to enable or disable SCC eMMC Support.
The optional settings are: [Disabled]; [Enabled].
eMMC Max Speed
Use this item to select the eMMC max Speed allowed.
The optional settings are: [HS400]; [HS200]; [DDR50].
45
Advertisement
Table of Contents
