Table of Contents
Advertisement
When set as [Enabled], the following sub-items shall appear:
Turbo Mode
Use this item to enable or disable Turbo Mode.
The optional settings: [Disabled]; [Enabled].
C-States
Use this item to enable or disable C-State.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], users can make more settings in the following sub-items:
Enhanced C-states
Use this item to enable or disable C1E. When enabled, CPU will switch to minimum
speed when all cores enter C-state.
The optional settings: [Disabled]; [Enabled].
Max Package C State
Use this item to control the Max Package C State that the processor will support.
The optional settings: [PC2]; [PC1]; [C0].
Max Core C State Limit
This item controls the max Core C State that cores will support.
The optional settings: [Fused Value]; [Core C10]; [Core C9] [Core C8]; [Core C 7]; [Core
C 6]; [Core C1]; [Unlimited].
Network Stack Configuration
Press [Enter] to go to 'Network Stack' screen to make further settings.
Network Stack
The optional settings are: [Enabled]; [Disabled].
When set as [Enabled], the following sub-items shall appear:
Ipv4 PXE Support
The optional settings are: [Disabled]; [Enabled].
Use this item to enable Ipv4 PXE Boot Support. When set as [Disabled], Ipv4 boot option
will not be created.
Ipv6 PXE Support
The optional settings are: [Disabled]; [Enabled].
Use this item to enable Ipv6 PXE Boot Support. When set as [Disabled], Ipv6 boot option
will not be created.
PXE Boot Wait Time
Use this item to set wait time to press [ESC] key to abort the PXE boot.
39
Advertisement
Table of Contents
