JETWAY MI12-00V Series User Manual page 44

►
PC Health Status
Press [Enter] to view current hardware health status, make further settings in 'SmartFAN
Configuration'.
► SmartFAN Configuration
Press [Enter] to make settings for SmartFan Configuration:
SmartFAN Configuration
CPUFAN Type/SYSFAN Type
The optional settings are: [4-Pin]; [3-Pin].
CPUFAN /SYSFAN Smart Mode
The optional settings are: [Disabled]; [Enabled].
*When set as [Enabled], user can make further settings in the following sub-items:
CPUFAN/SYSFAN Full-Speed Temperature
Use this item to set CPUFAN/SYSFAN full speed temperature. Fan will run at full speed
when above this pre-set temperature.
CPUFAN/SYSFAN Full-Speed Duty
Use this item to set CPUFAN/SYSFAN full-speed duty. Fan will run at full speed when
above this pre-set duty.
CPUFAN/SYSFAN Idle-Speed Temperature
Use this item to set CPUFAN/SYSFAN idle speed temperature. Fan will run at idle speed
when below this pre-set temperature.
CPUFAN/SYSFAN Idle-Speed Duty
Use this item to set CPUFAN/SYSFAN idle speed duty. Fan will run at idle speed when
below this pre-set duty.
 CPU Configuration
Press [Enter] to view current CPU configuration and make settings for the following sub-
items:
VT-d
Use this item to enable or disable CPU VT-d.
The optional settings: [Enabled]; [Disabled].
EIST
Use this item to enable or disable Intel SpeedStep.
The optional settings: [Disabled]; [Enabled].
38