JETWAY MI12-00V Series User Manual page 40

IRQ=11]; [IO=298h; IRQ=11] for 'Serial Port 8 Configuration'.
*The optional settings are: [Auto]; [IO=290h; IRQ=11]; [IO=280h; IRQ=11]; [IO=288h;
IRQ=11]; [IO=298h; IRQ=11] for 'Serial Port 9 Configuration'.
*The optional settings are: [Auto]; [IO=298h; IRQ=11]; [IO=280h; IRQ=11]; [IO=288h;
IRQ=11]; [IO=290h; IRQ=11] for 'Serial Port 10 Configuration'.
ERP Support
Use this item to enable or disable Energy-Related Products function.
The optional settings: [Disabled]; [Enabled].
This item should be set as [Disabled] if you wish to have all active wake-up functions.
Case Open Detect
Use this item to detect case has already open or not, show message in POST.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], system will detect if pin 1-2 of jumperJP2 has been short or not
(refer to Page 12; if pin 1-2 of jumperJP2 is short, system will show Case Open Message
during POST.
WatchDog Reset Timer
Use this item to enable or disable WDT reset function.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
WatchDog Reset Timer Value
User can select a value in the range of [10] to [255] seconds when 'WatchDog Reset
Timer Unit' set as [Sec]; or in the range of [1] to [255] minutes when 'WatchDog Reset
Timer Unit' set as [Min].
WatchDog Reset Timer Unit
The optional settings are: [Sec.]; [Min.].
WatchDog Wake-up Timer
This item support WDT wake-up.
The optional settings are: [Enabled]; [Disabled].
When set as [Enabled], the following sub-items shall appear:
WatchDog Wake-up Timer Value
User can select a value in the range of [10] to [4095] seconds when 'WatchDog Wake-
up Timer Unit' set as [Sec]; or in the range of [1] to [4095] minutes when 'WatchDog
Wake-up Timer Unit' set as [Min].
34