JETWAY MI12-00V Series User Manual page 38

SHA256 PCR Bank
Use this item to enable or disable SHA256 PCR Bank.
The optional settings: [Disabled]; [Enabled].
Pending Operation
Use this item to set an Operation for the Security Device..
The optional settings: [None]; [TPM Clear].
*Note: Your Computer will reboot during restart in order to change state of security
device.
 ACPI Settings
Press [Enter] to make settings for the following sub-items:
ACPI Settings
ACPI Sleep State
Use this item to select the highest ACPI sleep state the system will enter when the
suspend button is pressed.
The optional settings are: [Suspend Disabled]; [S3 (Suspend to RAM)].
 Super I/O Configuration
Press [Enter] to make settings for the following sub-items:
Super IO Configuration
► Serial Port 1 Configuration
Press [Enter] to make settings for the following items:
Serial Port 1 Configuration
Serial Port
Use this item to enable or disable serial port 1 (COMA).
The optional settings are: [Disabled]; [Enabled].
When set as [Enabled], user can make further settings in the following items:
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings are: [Auto]; [IO=3F8h; IRQ=4]; [IO=2F8h; IRQ=3]; [IO=3E8h; IRQ=4];
[IO=2E8h; IRQ=3].
Transmission Mode Select
The optional settings are: [RS422]; [RS232]; [RS485].
Mode Speed Select
The optional settings are: [RS232/RS422/RS485=250kbps]; [RS232=1Mbps,
RS422/RS485=10Mbps].
32