Front Panel - Function Button - Lorex DHT304 Installation & User Manual

FRONT PANEL – FUNCTION BUTTON
QUAD/ENTER BUTTON
PIP BUTTON
POP BUTTON
1. CHANNEL / ARRTOW BUTTON
These buttons perform the following functions :
a) Displays a picture in Full Screen. If you are in the Quad1 mode, select the Channel 1button and hold
it for 2-3 seconds to view Camera 1 in Full Screen. To view other camera locations, press
CH2, CH3, CH4 buttons.
b) Freezes a specific camera.
You have the option to freeze images in Full or Quad screen mode.
In Quad Screen mode : Press a channel button to freeze this channel in the Quad screen ;
In Full Screen mode : Press the current channel being viewed to freeze it; press again to unfreeze.
c) Scrolls LEFT / UP / DOWN / RIGHT in Menu mode.
These buttons are used to navigate through menu options.
d) MOVE / ZOOM / FOCUS in Pan / Tilt mode.
These buttons are used to arrow button on Pan / Tilt.
2. QUAD / ENTER BUTTON
a) QUAD : Pressing this button goes to Quad viewing mode.
b) ENTER : This button serves as the ENTER key in Menu mode.
3. PIP BUTTON
PIP allows you to view two camera locations simultaneously, one being the main channel, the other
being viewed as a sub-picture. Dual PIP can also be selected, which displays two sub-pictures as
illustrated below. To change between Single PIP and Dual PIP, repeatedly press the PIP button.
CH1 CH2 CH3
QUAD/ENTER PIP POP
SEQ BUTTON
press again to unfreeze;
SINGLE PIP SINGLE PIP SINGLE PIP
CHANNEL/ARROW
BUTTON
CH4
SEQ SETUP EVENT
SETUP BUTTON
DUAL PIP DUAL PIP DUAL PIP
- 08 -
EVENT BUTTON
SEARCH BUTTON
SEARCH PTZ/ALRS
PTZ/ALRS
BUTTON