Pan /Tilt Zoom - Lorex DHT304 Installation & User Manual

PAN / TILT ZOOM :
The DVR is equipped with a built-in Pan/Tilt Zoom feature, which is only available when used in conjunction
with a compatible Pan/Tilt Dome camera.
The Pan/Tilt Zoom feature supports "Pelco D" protocol, and RS-485 Port.
To access and operate the PTZ feature, follow these instructions :
1. Connect a compatible Pan/Tilt Zoom Dome camera to RS-485 Port ;
2. Go to the SYSTEM submenu and set the PAN/TILT(CH1) option to "Y" ;
3. Enter the Pan/Tilt Zoom mode by holding the PAN/TILT key on the DVR for 3 seconds, or press the
Pan/Tilt button on the remote control ;
4. You will see a contracted screen with a blue border.
5. Use the Arrow keys to sideways, and QUAD/ENTER Button to select whether to MOVE, ZOOM, or
FOCUS the camera.
6. If you have selected MOVE, you can use all four arrow keys to Pan and Tilt in all directions. If you
selected ZOOM or FOCUS, use the arrow keys to Zoom / Focus IN / OUT.
7. Select and press ENTER on the EXIT option to escape Pan/Tilt mode.
Note : the system automatically exits Pan/Tilt mode after 20 seconds of inactivity.
Refer to the diagram below for an illustration of Pan/Tilt Zoom mode.
[CH1 PAN/TILT MODE]
MOVE ZOOM FOCUS
- 25 -
EXIT