Table of Contents
Advertisement
(i) HDD INFO DISP : Sets the display settings for information on the HDD status. This can be
(ii) RS232 BAUD RATE : Sets the speed at which the RS 232 input and the computer communicate.
(iii) PASSWORD SET : If you select [Y], you will need to input a password when you enter the Main
(iv) NETWORK (TCP/IP) :.Set network enable or disable.
(v) USER ID/PASSWORD : User can set password for Master ID and account.
(vi) GUEST PASSWORD : User can set password for GUEST account.
Note : Master gets full accessibility in network whereas GUEST can see only.
(vii) IP ADDR : Set IP address for enabling network.
Default value - 192 168 001 100
(viii) SUB NET : User can set Subnet Mask value for enabling network
Default value - 255 255 255 0
(ix) GATEWAY : Setting up Gateway value for enabling network
Default value - 192 168 001 001
(x) PORT : Setting up Port value for enabling network
Default value - 5000
8. HDD / REC SET - This submenu allows you to set the Record parameters for your Hard Disk Drive.
(i) REC QUALITY : Sets the quality level of recording. Available settings are: Normal, High and Best.
Note : Higher quality recording consumes more memory on your HDD.
(ii) REC RESOLUTION
(iii) REC SPEED : Allows you to set the Images Per Second for recording. Available IPS settings are:
(iv) REC SELECT : Selects which channels will be recorded to the HDD.
(v) USB REC LIMIT : Select the storage capacity to be saved via USB.
Note : Even the storage capacity is already set, you could stop the saving process
immediately by pressing he "STOP" button during the process.
(vi) HDD CLEAR ALL : Select [MASTER] to delete all the contents in your Master HDD, then press
Note : If you have a SLAVE HDD connected as well and the HDD Slave option is set to [Y], then
you may also choose to Clear the contents of your Slave HDD.
displayed as a percentage of HDD space used, or amount of Bytes available, or
the HDD information display can be set to OFF.
Baud Rate, which is the rate of data transmission, can be set to: OFF,
2400, 4800, 9600, or 19200.
Menu, and [N] will allow you into the menu without a password.
Changes your password for accessing the Menu. The password must be 4
digits.
Default value - ADMIN/12345.
Default value - 12345.
1, 2, 3, 5, 10, 15, 30 & 60. The speed of 60 IPS is also known as "Real Time".
1 IPS is the slowest Time Lapse speed; it will allow for the longest recording
durations as it records less information.
Select [0] to enable recording on a camera channel
Select [x] to disable recording on a camera channel
the button and you will be asked "REALLY?". Select [Y] to confirm the HDD
Clear.
- 20 -
Advertisement
Table of Contents
