6.2
Starting position of the thread-pulling knife
Rule:
If the thread-pulling knife (1) is locked in the starting position with a
needle shank (2), the electric motor shock absorber (4) and the lever
(3) should be positioned at the stop.
2
1
6
–
Dismantle the throat plate insert in the recess (6).
–
Loosen the screw (5) with the hexagonal key 3 mm.
–
With your hand slightly turn the thread-pulling knife (1) to the
starting position and lock it with the needle shank (2).
–
Turn the lever (3) in the arrow direction to the stop and then fix it
with the screw (5).
–
Remove the needle (2) and mount the throat plate insert back
again.
Caution: Danger of injury !
Turn the main switch off.
Proceed with the thread cutter setting only with the sewing
machine switched off.
EN
31