Pioneer XDV-P9 Service Manual page 86

XDV-P9
- Removing the Damper Unit
1. Remove the screw E and then the damper unit.
- Removing the Holder Unit
1. Remove the washer and then the holder unit.
- Precautions on the assembly of the damper
Assy
1. The damper unit has long and round holes. Engage
the round hole with the boss of the holder unit and
tighten the long hole with screw E.
2. The gear has its orientation. Mount the gear which
has three protrusions on the bracket unit side.
- Removing the Button
1. Insert minus (standard) screwdrivers to the arrow
view section to remove the stopper and the button.
86
Damper Assy(R)
Holder Unit
Washer
Gear
Bracket Unit
Damper Assy(L)
Damper Unit
E
Bracket Unit
Damper Unit
E
Washer
Button
Holder Unit
Gear