Table of Contents
Advertisement
- Removing the Cover
1. Remove the two screws.
2. Insert minus (standard) screwdrivers in the arrow
view section to remove the claw and the cover.
- Removing the Door Section
1. Remove the four screws A, two screws B and then
remove the door section.
- Grease Coating
When replacing the springs by new ones, be sure to
apply grease (ZLB-PG641).
- Removeing the Keyboard Unit
1. Remove the four screws C and then the keyboard
unit.
- Removeing the Damper Assy(L), (R)
1. Remove the four screws D and then the damper
assy(L), (R).
Cover
A A
B
Door Section
Spring
D
C
Keyboard Unit
D
Damper Assy(L)
XDV-P9
A A
B
C
C
C
Damper Assy(R)
D
85
D
Advertisement
Table of Contents
