Table of Contents
Advertisement
11. If the mechanism unit is dislocated:
Place the mechanism unit facedown.
When the mechanism unit is dislocated to the direction of the first disc,
turn VR302 counterclockwise. (Fig. 2)
Drop the voltage of EREF by 20 mV which was adjusted in 7.
to descend the stage to the direction of the sixth disc by 0.1 mm.
When the mechanism unit is dislocated to the direction of
the sixth disc, turn VR302 clockwise. (Fig. 4)
Raise the voltage of EREF by 20 mV which was adjusted in 7.
to ascend the stage to the direction of the first disc by 0.1 mm.
12. Place the mechanism unit horizontally and recheck from 10.
13. After adjustment has been completed,
14. Press the EJECT switch.
15. After the operation of the mechanism unit has stopped, turn off the power.
16. After the power has be turned off, turn on the power in one minute or more
and insert the magazine.
17. Check that the mechanism unit operates normally for the first and fourth discs.
18. Terminate all adjustment for OK (normal operation) and readjust for NG (abnormal operation).
XDV-P9
GND
EREF
VR302
47kΩ
L.P.F
1µF
Oscilloscope
71
Advertisement
Table of Contents
