PIONEER Service Manual. A subscription to, or additional copies Also test with plug reversed of, PIONEER Ser vice Manual may be obtained at a (Using AC adapter Earth nominal charge from PIONEER. plug as required)
Page 3
Any disc that displays one of the following logos should play in this player. Other formats, including DVD-Audio, DVD-RAM, DVD-ROM, CD-ROM (except those that contain MP3 files), SACD and Photo CD will not play. DVD-Video Audio-CD Video-CD CD-R CD-RW DV-353-K...
7.1.2 DISPLAY OF THE MECHANISM ERROR HISTORY ................60 7.1.3 TEST POINTS LOCATION & WAVEFORMS ................... 64 7.1.4 TROUBLE SHOOTING ..........................68 7.1.5 SEQUENCE AFTER THE POWER ON ....................70 7.1.6 DISASSEMBLY ............................71 7.2 IC .................................. 76 7.3 CLEANING ..............................94 8. PANEL FACILITIES ............................95 DV-353-K...
Accessories Remote Control : VXX2800 Audio/Video Cable (L=1.5m): XDE3049 AA/R6P Dry Cell Batteries White STANDBY/ON OPEN/CLOSE AUDIO SUBTITLE ANGLE CLEAR Yellow ENTER TOP MENU MENU ENTER Power Cable : ADG7022 SETUP RETURN ¡ ¢ PLAY MODE SURROUND ZOOM DISPLAY DV-353-K...
For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions, apply as you think it appropriate.) 2.1 PACKING 5, 6 "Operating Instructions" DV-353-K...
Page 7
See Contrast table (2) Packing Case See Contrast table (2) Seat Z23-007 Battery Cover VNK4997 (2) CONTRAST TABLE DV-353-K/KUXJ, KCXJ, DV-353-S/KUXU/CA, DV-250/KUXU, KCXU and DV-251/KUXQ are constructed the same except for the following : Part No. DV-353-K DV-353-S DV-250 DV-251 Mark No.
2.2 EXTERIOR SECTION Refer to "2.3 LOADING MECHANISM ASSY". NON-CONTACT SIDE CONTACT SIDE 24 24 DV-353-K...
Page 9
Screw BBZ30P100FZK Screw See Cotrast table (2) Bonnet Case S See Cotrast table (2) (2) CONTRAST TABLE DV-353-K/KUXJ, KCXJ, DV-353-S/KUXU/CA, DV-250/KUXU, KCXU and DV-251/KUXQ are constructed the same except for the following : Part No. DV-353-K DV-353-S DV-250 DV-251 Mark No.
2.3 LOADING MECHANISM ASSY Note : Refer to " Application of Lubricant". Refer to "2.4 TRAVERSE MECHANISM ASSY-S". Daifree GEM1036 To FJMB CN251 Lubricating Oil GYA1001 Lubricating Oil GYA1001 DV-353-K...
Page 11
Z39-019 Tray VNL1920 (2) CONTRAST TABLE VWT1196, VWT1197 and VWT1188 are constructed the same except for the following : Part No. Mark No. Symbol and Description Remarks VWT1196 VWT1197 VWT1188 LOAB Assy VWG2346 VWG2279 Flexible Cable (26P) VDA1864 VDA1865 DV-353-K...
Page 12
GYA1001 Daifree No. 23 Daifree No. 23 GEM1036 Tray GEM1036 Tray Concave of unevenness Concave of unevenness Inner side of a ditch Daifree GEM1036 Bottom View Top View Side of the rib Concave of unevenness Daifree Daifree GEM1036 GEM1036 DV-353-K...
: FOCUS SERVO LOOP LINE for ##XCN type : TRACKING SERVO LOOP LINE : SLIDER SERVO LOOP LINE POWER SUPPLY UNIT (VWR1351 or VWR1353) PICKUP ASSY-S (OXX8003) SPINDLE STEPPING MOTOR MOTOR : VXM1090 : VXX1088 LOAB ASSY LOADING (VWG2279) MOTOR ASSY : VXX2505 DV-353-K...
Page 25
: S-VIDEO OUT C SIGNAL ROUTE (S_C) (S_Y) : S-VIDEO OUT Y SIGNAL ROUTE (R/Cr) : R/Cr SIGNAL ROUTE (G/Y) : G/Y SIGNAL ROUTE (B/Cb) : B/Cb SIGNAL ROUTE : AUDIO SIGNAL ROUTE (S_Y) : AUDIO(DIGITAL) SIGNAL ROUTE (R/Cr) (G/Y) (B/Cb) DV-353-K...
Transistor B C E SIDE A Transistor with resistor B C E Field effect SIDE B P.C.Board Chip Part transistor Resistor array 3-terminal regulator 4.1 LOAB ASSY LOAB ASSY (VNP1836-B) CN11 CN52 LOADING MOTOR ASSY SIDE A SIDE B DV-353-K...
Tangential Radial adjustment adjustment [Electrical Part] screw screw Electrical adjustments are not required. 6.2 JIGS AND MEASURING INSTRUMENTS Test mode remote control Screwdriver (large) Screwdriver (medium) TV monitor unit (GGF1067) Screw tight (GYL1001) DVD test disc Precise screwdriver (GGV1025) DV-353-K...
Purpose: To set the sweep which was correct with the individual Traverse mechanism. Be sure to perform the following step finally when replaced Pickup, Traverse Mechanism and Spindle Motor. CLEAR GGF1067 Test mode remote control unit (It is necessary when performed adjustment procedure Ÿ.) DV-353-K...
An address is displayed < When playback with the target address of disc (DVD)> For example, when playback with # 30000 CHP/TIM During PLAY Press keys in order 030000 TEST MODE: OFF POWER GGF1067 Test mode remote control unit DV-353-K...
Mechanism Base and turn each screw to adjust the height. (Refer to "6.1 ADJUSTMENT ITEMS AND LOCATION".) Spacer for Height adjustment Note: Turn the Short switch to Short side when Turn a flat side removing the Pickup Flexible Cable. into bottom (Refer to "7.1.6 DISASSEBLY".) DV-353-K...
J : Min Disc playback normally. If error rate is OK, • The measurement of block error rate locks a root of tangential and radial adjustment screws with the Screw tight, and go to step Screw tight: GYL1001 Test mode end DV-353-K...
Page 53
Initialize the Focus Sweep Setting Purpose: To set the sweep which was correct with the individual Traverse mechanism. Turn on the Player POWER CLEAR Note: Be sure to perform this step when replaced the Pickup or Traverse mechanism. DV-353-K...
Perform only trace, video and audio output are nothing. = Screen display ON/OFF 1. Turn off the display by pressing the [AUDIO] (A8-1E) key of the remote control unit. 2. Turn on the display by pressing the [DISPLAY] (A8-43) key of the remote control unit. DV-353-K...
Page 55
• After the search, perform only trace and video and audio outputs are nothing. 4. Release the Search address input • Clear the address by pressing the [CLEAR] (A8-45) key. Release the address input mode when pressing the [CLEAR] key once again. DV-353-K...
(Display only the WY model which can do the output setting of skirt terminal.) VIDEO : [00] S-VIDEO : [01] : [02] 0 Disc sensing [DSC – ∗ ∗ ∗] The type of discs loaded is displayed. [DVD], [CD ], [VCD], [ DV-353-K...
Page 57
Change blue and green with toggle whenever pressing the key (the background color that green is using with SETUP NAVIGATOR). • Region confirmation mode Input region No. after pressing the ESC+AUDIO keys. When it is different from the setting, display and open the tray. DV-353-K...
CUT ID / JTAG ID (two columns) (eight columns) 9 B.E VERSION Version of BACK END (version of ST core software) softwareVersion . softwareRevision / buildNumber 0 F.E VERSION Version of FRONT END (version of mechanism controller CHIP software) MainVersion / SubVersion DV-353-K...
Indicate the mechanism error history by pressing the CHP/TIM key once again. Change indication by pressing the CHP/TIM key with toggle afterwards. Refer to the "Display of the Mechanism Error History". Indication plan contents Character in bold : Item name : Information display DV-353-K...
Do move to inner and outer periphery 1. Stepping motor of the stepping in the test mode? 2. Inside switch Stepping move timeout 0 x 54 Did timeout at stepping movement Do indicate "S-04" at the most inner 3. Driver periphery of the stepping? DV-353-K...
Page 62
SRAM error 0 x d1 Cannot access SRAM 2. L6315 (Front End IC) Is not bus line short-circuiting? 3. L6315-SRAM bus line FAILSAFE (0 x e∗) 1. software runaway Unexpected error 0 x e1 Unexpected error 3. Software bug DV-353-K...
FL controller outputs the signal which can communicate in BACK END (FP_XRDY) BACK END – FL controller communication The opening picture output FRONT END identifies the following: • Slider positioning (INSIDE SW) • Spindle FG standstill Disc detection (Focus control) Spindle turn DV-353-K...
: This is not installed to this. Slit Small Square-bar Screwdriver Protruding portion Drive Gear Tray Tray Tray Loading Mechanism Assy Tray Panel Front Panel Assy Unclamp the wire. Disconnect the wiring. Unhook (×6) Remove the Front Panel. ×3 ×3 Front Panel DV-353-K...
Page 72
Front Panel Assy from Front Panel Assy from Front Panel Assy FJMB Assy FJMB Assy FJMB Assy Put the Power Cable in the outlet. Power ON Set the Test Disc. Playback with a test disc, and diagnose the FJMB Assy. DV-353-K...
Page 73
Assy Caution in the tray insertion In the Tray insertion, insert it after matching a triangle mark of the Loading Base and a position of pin of the Drive Cam. Loading Base Triangle mark Holder Bottom View Drive Cam DV-353-K...
Page 74
When Removing The Pickup Assy Screw is locked with Silicone adhesive. Please lock it with Silicone adhesive when installs it. Remove the Pickup Flexible Cable. Silicone Adhesive GEM1037 Slider Hold Spring Pickup Assy Traverse Mechanism Joint Assy Silicone Adhesive GEM1037 Exchange DV-353-K...
Page 75
Move the Pickup to the innermost of the disc. Perform the styling as shown in figure below. Lose slack Fold position of step Bottom View Bottom View Fold it at the position of reference line. Reference line Bottom View Bottom View DV-353-K...
Page 76
• The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams. • List of IC M56788AFP, MM1567AJ, STI5519AVB-B0C, PE5314A, L6315ATXXTY, BA6664FM, PCM1742KE 7 M56788AFP (FJMB ASSY : IC351) • FTS Driver IC ¶ Block Diagram DV-353-K...
Page 92
Control reference pin of output voltage Output pin Output voltage control pin GND pin Power save pin FG signal output pin Power supply pin Gain switching pin Hall signal input pins Motor power pin Resistor connection pin for output current detection Hall bias pin DV-353-K...
DATA 2 4× / 8× Oversampling Enhanced Digital Filter Multi-level with Delta-Sigma Function Modulator Controller ML 15 Serial Control MC 14 Output Amp and Port Low-pass Filter MD 13 System Clock System Clock Power Supply Zero Detect SCK 16 Manager DV-353-K...
7.3 CLEANING Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools: Position to be cleaned Cleaning tools Pickup leneses Cleaning liquid : GEM1004 Cleaning paper : GED-008 DV-353-K...
• Press to jump to the next chapter or track Display 10 4 1 • Press and hold for fast reverse scanning • Press to jump back to the beginning of the Press to start or resume playback current chapter or track, then to previous chapters/tracks DV-353-K...
Page 96
DVD title number 11 3 Lights when a disc is playing Lights when 2V/TruSurround is active 12 2D Lights when a Dolby Digital soundtrack is Indicates that the character display is playing showing a CD or Video CD track number DV-353-K...
TV, AV receiver or stereo system. Even if you are connecting up one of the digital outputs, we still recommend you connect these jacks. Use the supplied audio/video cable when connecting these jacks. Match the colors of the jacks and cables for correct stereo sound. DV-353-K...
PLAY MODE SURROUND ZOOM DISPLAY Press to start or resume playback 10 4 Press to jump to the beginning of the current chapter or track, then to previous chapters/ tracks 11 8 Press to pause playback; press again to restart DV-353-K...
Page 99
3 (play)) 17 ENTER 23 DISPLAY Use to select menu options, etc. (works Press to display information about the disc exactly the same as the ENTER button in 6 playing above) 24 ZOOM Press to change the zoom level DV-353-K...