Appendix E - System Events - Graco HFRL Setup And Operation Manual

Appendix E - System Events

Event Code and
String Triggers
ECC1-R: Cavitation The cavitation error generation logic is
Errors On turned ON (default and recommended
state for production use).
ECC0-R: Cavitation The user has turned OFF the
Errors Off Cavitation Error Generation logic (not
recommended for production use).
This event also generates if cavitation
errors are off when the product
powers up. An error will not generate if
an HFR pump does not completely fill,
and the material ratio may be
incorrect.
ECD0-R: Mixer Motor User has activated function (Pressed
Disabled for Dispense
"
effects on future dispenses.
ECD1-R: Mixer Motor User has re-enabled the mixer motor
Enabled for Dispense for dispensing.
ECF0-R: Mixer Air User has activated function (Pressed
OFF for Dispense
"
effects on future dispenses.
ECF1-R: Mixer Air User has re-enabled Air Nucleation for
Enabled for Dispense dispensing.
ECGX: Dispense The rate (flow or pressure) or amount
Recipe Altered by has been altered by the controlling
PLC CGM/PLC interface when the system
was in shot mode.
REL00: System Pow- The System was powered on.
ered On
REM00: System The System was powered off.
Powered Off
REB00: Stop Button The Red stop button was pressed on
Pressed the Advanced Display Module.
RECH0: Learn Mode A learn mode calibration was success-
Executed fully completed.
RENN0: Automatic The system was successfully charac-
Cal. Performed terized with the Automatic calibration.
RECA1: Red Material The Red materials specific gravity was
SG Modified modified.
RECB2: Blue Mate- The Blue materials specific gravity
rial SG Modified was modified.
RENC1: Cal. Point 1 A value for the first point in the three
Weight Entered point calibration was entered.
RENC2: Cal. Point 2 A value for the second point in the
Weight Entered three point calibration was entered.
RENC4: Cal. Point 1 The running average for point one of
Weight Erased the three point calibration was erased.
RENC5: Cal. Point 2 The running average for point two of
Weight Erased the three point calibration was erased.
3A2175Z
" key) which may have negative
" key) which may have negative
Event Code and
String Triggers
REND0: Ratio Check A ratio check shot was dispensed
Dispense from the ratio check calibration
screen.
REA00: Disp. A dispense has occurred of the given
Occurred (Shot #) shot number.
REH00: Gel Timer The gel timer expired and the system
Dispense automatically took the gel shot.
RER01: Shot Count A counter from the shot counters
Reset maintenance page was erased
RER02: Seq. Posi- A counter from the sequence counters
tion Count Reset maintenance page was erased
RERA1: Red Material The resettable totalizer for the Red
Volume Reset material volume was reset to zero.
RERB1: Blue Mate- The resettable totalizer for the Blue
rial Volume Reset material volume was reset to zero.
RERA2: Red Material The resettable totalizer for the Red
Weight Reset material weight was reset to zero.
RERB2: Blue Mate- The resettable totalizer for the Blue
rial Weight Reset material weight was reset to zero.
RERA3: Red Cycle The resettable cycle counter for the
Count Reset Red pump was reset to zero.
RERB3: Blue Cycle The resettable cycle counter for the
Count Reset Blue pump was reset to zero.
REQU1: Settings The system settings were successfully
Downloaded transferred from the ADM to a USB
drive.
REQU2: Settings The system settings file was success-
Uploaded fully transferred from the USB drive to
the ADM.
REQU3: Language The custom language file was suc-
Downloaded cessfully transferred from the ADM to
a USB drive.
REQU4: Language The custom language file was suc-
Uploaded cessfully transferred from the USB
drive to the ADM.
REQU5: Logs Down- The Error/Event and Shot data logs
loaded were successfully transferred from the
ADM to a USB drive.
REAR0: Night Mode While in night mode the system has
Recirc On automatically entered a low recircula-
tion mode and attempted to turn on all
enabled conditioning zones.
REBR0: Night Mode While in night mode the system has
Recirc Off automatically stopped the low recircu-
lation mode and turned off all condi-
tioning zones.
Appendix E - System Events
97