Appendix A - Adm Icons Overview; Setup Screen Icons - Graco HFRL Setup And Operation Manual

Appendix A - ADM Icons Overview

Appendix A - ADM Icons Overview

Setup Screen Icons

Icon Description
Enter Screen
Exit Screen
On Learn Mode Calibration screen:
Move pump
All other screens:
Begin Dispense
Stop Dispense
Abort Changing the Label
Select left direction
Select right direction
Backspace
Back to main calibration screen from
learn mode calibration screen
or
Back to system screen 2 from mix
head operating details screen
Access Learn Mode Calibration
screen
Run MCM Learn Mode
Proceed to next step in calibration
procedure
On Main Calibration screen:
Calibrate Weight Dispense or Enter
Specific Gravity Information
On Flow Meter Calibration screen:
Use Dispensed Material Weight to
Calibrate Flow Meters. If pressed,
icon will change and units are
changed to volume units.
Erase Selected Item or Control Data
58
Icon Description
Erase All Counters on Page
Access Flowmeter Calibration
Valve Details
Selects all shots to be changed to the
same user specific value
Pressure
Shot Number
Sequence Position
Flow
Time (Duration)
Tank Blanket Heater
Primary Heater
Heated Hose
Chiller
Move Cursor to the Left
Move Cursor to the Right
Upper/Lower Case Letters
Positive / Negative
Read Programmed Blue Token
3A2175Z