Appendix F - Usb Operation; Overview; Usb Options; Download Log Files - Graco HFRL Setup And Operation Manual

Appendix F - USB Operation

Appendix F - USB Operation

Overview

There are 3 main uses for the USB on a GMS system:
• Ability to download a log of the past 50,000 errors
and events and a shot log that can contain over
250,000 snapshots of critical dispense information
• Ability to download, modify, and upload custom
language files
• Ability to download and upload system configura-
tions
• This data includes most user selectable and
user configurable settings.
• This data does not include pump counters,
error and event logs, shot and sequence count-
ers

USB Options

The only options for USB on the ADM are in Advanced
Screen 4, see page 73.
The first option is a checkbox that enables or disables
the downloading of the Error Event and Shot Data log
files. The Shot Data log runs during all recirculation,
shots, and operator modes.
98
The second option is the Erase icon which will reset the
last download date to a time where all logs can be
downloaded, 10/25/18. This will allow the user to
download all the USB log entries, which may take over
2 hours if the log files are full. Currently the ADM does
not monitor the USB logs and alert the user when data
may be overwritten so in order to minimize download
times and the risk of losing data it is recommended that
the user download the logs every 2 weeks or more
often if the machine is used during more than one full
shift a day.

Download Log Files

If the "Enable Downloading of USB Logs" is checked,
the user can use a USB stick-drive to download the log
files.
To download the log files, insert a high-quality USB
stick-drive into the USB port in the bottom of the ADM.
The ADM will automatically begin downloading the log
files as well as the custom language file (DISP-
TEXT.TXT) and the system settings (SETTINGS.TXT).
The status of the download will be shown in the Status
bar.
3A2175Z