Adapter Retainer - IBM IntelliStation M Pro Hardware Maintenance Manual

Adapter retainer

Before you begin:
v Read "Safety information" on page 129.
v Read "Installation guidelines" on page 31.
v Review the information in "System reliability considerations" on page 31.
To remove the adapter retainer, complete the following steps:
1. Turn off the computer, if it is on.
2. Disconnect the computer power cord.
3. Remove the side cover. See "Removing the side cover" on page 52.
4. Remove all adapters. See "Installing an adapter" on page 55.
5. Rotate the adapter retainer to the open position.
6. Grasp the adapter retainer, and gently slide the top and bottom tabs out of the
98
IBM IntelliStation M Pro Types 6220 and 6230: Hardware Maintenance Manual
notches.