IBM IntelliStation M Pro Hardware Maintenance Manual page 48

Internal drive bays
Your M Pro Type 6220 comes with an IDE CD-ROM, CD-RW, or DVD/CD-RW drive
in bay 2 and a hard disk drive in bay 3.
Notes:
1. Tape drives, CD-ROM, DVD/CD-RW, and DVD-ROM drives are examples of
2. You have two serial ATA (SATA) IDE hard disk drive connectors on the system
3. You can mix and match parallel IDE or serial ATA IDE hard disk drives in bays 1
4. The electromagnetic interference (EMI) integrity and cooling of the computer are
5. For a complete list of supported options for your computer, go to
Preinstallation steps
Some of these steps are required only the first time you install a hard disk drive in a
specific bay.
1. Review the safety information beginning on page 129, "Installation guidelines"
2. Verify that you have all the cables and other equipment specified in the
3. Choose the bay in which you want to install the drive.
4. Check the instructions that come with the drive to see if you need to set any
Installing a drive in bay 1
Complete the following steps to install a drive in bay 1:
38
IBM IntelliStation M Pro Types 6220 and 6230: Hardware Maintenance Manual
removable-media drives. You can install removable-media drives in bay 2 only.
board.
and 3.
protected by having all bays and PCI slots covered or occupied. When you
install a drive or PCI adapter, save the EMC shield and filler panel from the bay
or the PCI adapter slot cover in the event you later remove the option.
http://www.ibm.com/pc/ on the World Wide Web; then, select your country and
navigate to the list of options for your computer.
on page 31, and the documentation that comes with your drive.
documentation that comes with the drive.
switches or jumpers on the drive.
1. Follow the instructions in "Preinstallation steps."
2. Turn off the computer and attached devices.
3. Disconnect all power cords; then, disconnect all external cables.
4. Remove the cover and frame-support bracket. See "Removing the cover" on
page 34 and "Removing and installing the support bracket" on page 35 for
details.
Bay 3
Bay 2
Bay 1