Power Button - IBM IntelliStation M Pro Hardware Maintenance Manual

5. Release the two tabs at the top edge of the bezel, and pull the top of the bezel
6. Pull the bezel up to release the two tabs at the bottom edge of the bezel. Store

Power button

Before you begin:
v Read "Safety information" on page 129.
v Read "Installation guidelines" on page 31.
v Review the information in "System reliability considerations" on page 31.
To remove the power button, complete the following steps:
slightly away from the computer.
the bezel in a safe place.
1. Turn off the computer, if it is on.
2. Unplug the computer.
3. Remove the side cover. See "Removing the side cover" on page 52.
4. Remove the front bezel. See "Removing the front bezel" on page 84.
5. Rotate the drive cage outward until it locks in the vertical position, so that you
can reach through to the other side of the power-switch and LED panel cable.
FRU information (service only)
85