Connection Of Special Adapters - Mitsubishi Electric FX Series Training Manual

System Configuration
2.10.1

Connection of Special Adapters

Special adapters of the FX
FX , and FX
3U
NOTE The following rules apply to FX
FX
3G
High-speed input/output special adapters
Up to two high-speed input special adapters FX
special adapters FX
Connect all high-speed I/O special adapters before connecting other special adapters when
they are used in combination. A high-speed I/O special adapter can not be mounted on the left
side of a communication or analog special adapter.
When only high-speed input/output special adapters are connected, the adapters can be used
without a communication or interface adapter board installed in the base unit.
Possible
configuration
Possible
configuration
Combination of analog and communication special adapters
Analog and communication special adapters must be used with a communication adapter board
or an interface adapter board installed in the base unit.
Possible
configuration
Illegal
configuration
2 - 36
series can be mounted on the left side of the base unit of the FX
3U
series.
3UC
or FX series, please refer to the appropriate manual.
3UC
-2HSY-ADP can be connected to a base unit.
3U
High-speed I/O
special adapter
High-speed I/O
special adapter
Communication
special adapter
Communication
special adapter
These adapters do not function.
base units. For the rules of system configuration for the
3U
-4HSX-ADP and up to two high-speed output
3U
High-speed I/O High-speed I/O
special adapter special adapter
High-speed I/O High-speed I/O
special adapter special adapter
Analog Communication or
interface adapter
special adapter
board
Analog
special adapter
No communication adapter board
or interface adapter board
The Hardware
Communication or
Base unit
interface adapter
board
Base unit
No communication adapter board
or interface adapter board
Base unit
Base unit
MITSUBISHI ELECTRIC
3G,