Ethernet Communications
Setting up a HMI of the GOT1000 Series (GT12,
18.4
GT15 or GT16)
Please start GT-Designer2 and open a new project. In the Project Navigator window, dou-
ble click on System Settings and make the settings shown below.
In the System Enviroment, double click on Communication Settings and make the set-
tings shown below.
Then, in the Communication Settings window, click on Detail Setting .
Training Manual GX IEC Developer
Setting up a HMI of the GOT1000 Series (GT12, GT15 or GT16)
18 - 11