GEM AD500 Instruction Manual page 33

Functions on the Control Unit (see also page 5) (Continued)
Function
Activation Input 1
(ON status)
Activation Input 1
(OFF status)
Functions on the Control Unit (DIP Switch Settings)
(see also page 5)
In Automatic Mode, there is a 0.7 second delay in motor starting following the activation of push button
and electric locking device.
ON/OFF Position
Changing mode of operation
ON
1 2 3 4
ON
1 2 3 4
Functions on the Control Unit (Potentiometer Settings)
(see also page5)
Potentiometer Rotation
Fast
Slow
Fast
Large Smal
SVR1 SVR2
Description
Operator is activated by
Activation Device 1.
1
Automatic Mode
Manual Mode
2
(Only applies if 1 is set to Automatic Mode)
Push Mode
Automatic Mode
SVR1 - Adjust the back check/ latch check angle. Turning clockwise
Slow
decreases the backcheck/latchcheck angle.
SVR2 - Adjust the closing speed.Turning clockwise decreases the
closing speed.
SVR3 - Adjust the opening speed. Turning clockwise decreases the
SVR3
opening speed.
Auto/
Manual
Push
Auto/
Manual
Push
Instructions
Instructions
Automatic Door Operator
Manual
Diagram
Hold
Activation
Open
Hold
Activation
Open
31