Notes For Engineers - GEM AD500 Instruction Manual

Automatic Door Operator
30
Manual
16. Notes for Engineers (If Not Using Operation Controller)
If the operation controller is not in use, please refer to the following wiring instructions.
Functions on the Control Unit (see also page 5)
Function
Automatic Mode
(Locked status)
Push Mode
(Unlocked status)
Manual Mode
(ON status)
Manual Mode
(OFF status)
Hold Open (ON status)
Hold Open (OFF status)
Description
Operator opens the door when
receiving an activation signal
and closes the door automatically.
*Default setting: Automatic mode
As door is pushed open slightly,
the operator senses door
movement and opens the door
to the full-open position.
Door can be manually opened
and then closed automatically.
Door is opened and closed
manually
Door can be held open after
the operator opens the door
to the full-open position.
Door cannot be held open after
the operator opens the door to
the full-open position.
Diagram
Auto/ Hold
Manual Activation
Push Open
Auto/ Hold
Manual Activation
Push Open
Auto/ Hold
Manual Activation
Push Open
Auto/ Hold
Manual Activation
Push Open
Auto/ Hold
Manual Activation
Push Open
Auto/ Hold
Manual Activation
Push Open