Table of Contents
Advertisement
Frame
Tighten the screws firmly once
leveling is complete.
9-6 Connect Power and Operation Controller
Connect 110 VAC or 220 VAC power.
If the operator body obviously slants to the right. Loosen the reducer
and adjust the levelness on the right side. In the same way. If the
operator body obviously slants to the left. Loosen the reducer and
adjust the levelness on the left side.
Door
Automatic Door Operator
Turn on the power switch on
operator. Press the exit button
on the operation controller to test
the motor operation.
21
Manual
Advertisement
Table of Contents
