Push Arm Assembly Installation (For Outswing Doors) - GEM AD500 Instruction Manual

Automatic Door Operator
22
Manual

10. Push Arm Assembly Installation (For Outswing Doors)

10-2 Gently install the first
and second arm with
pivot post onto the
operator body.
15°
10-1 Turn off power before installing the
arm assembly.
The first arm and pivot post should be kept at a 15 degrees
angle (approximately) according to the illustrated door handing
when installing the first arm to the operator body. Assemble
the first, second and third arm.
Adjust the third arm and door leaf to approximately a 90-degree
angle and then tighten all the screws.