GEM AD500 Instruction Manual page 25

10-3 Fasten the third arm to the door leaf per template. If adding the shaft extensions,
note the position is different.
P/N : DT-20
Note the centerline of hinge on the template.
Template Instructions
Push ARM
Door
The upper side of template and the
upper side of door leaf are aligned.
Standard
DT-20
DT-50
DT-70
P/N : DT-50
Left hand
CL of Pivot Post
Outswing Doors
CL of Pivot Post
300mm
CL of Pivot Post
40mm
Drill 3.3mm hole
60mm
Note the centerline of
hinge on the template.
Right hand
Outswing Doors
Automatic Door Operator
Manual
P/N : DT-70
(DT-20+DT-50)
The upper side of
template and the
upper side of door
leaf are aligned.
Standard
DT-20
DT-50
DT-70
Door
23