Step 5: Verify Setup; Printing The Menu Settings Page - Lexmark Optra Optra T Setup Manual

Step 5: Verify Setup

Printing the Menu
Settings Page
Warning!
Complete "Removing the Print
Cartridge and Packaging" on
page 9 before printing a page.
Installing Printer
Drivers and Utilities
22 Verify Setup
The menu settings page shows current settings for the menus and a list of
installed options. You can use this page to verify that all printer options are
properly installed and the printer settings are set to what you want.
1
Make sure the printer power is on and the Ready status message
appears on the display.
2
On the operator panel, press Menu> or <Menu to enter the menus.
3
Continue to press and release Menu> or <Menu until you see
UTILITIES MENU.
4
Press Select.
5
Press Menu> until Print Menus appears on the second line of the
display.
6
Press Select.
The message Printing Menu Settings appears on the operator
panel display until the page prints, then the printer returns to the
Ready state.
Note: If you receive a message, such as:
201 Paper Jam
Remove Cartridge
refer to the User's Guide on the
Publications CD for more information.
7
Verify that the options you installed are listed on the menu settings
page under "Installed Features."
If an option you installed does not appear on the page, turn the
printer off, unplug the power cord, and reinstall the option.
8
If you attached a serial cable, verify that the printer serial settings
listed on the menu settings page are appropriate for your system.
1
Locate the Drivers, MarkVision and Utilities CD.
2
Follow the instructions in the booklet included with the CD to start
the printer setup utility appropriate for your operating system.