Lexmark Optra Optra T Setup Manual page 15

Mounting bracket
Attaching Labels to Output
Expanders and 5-Bin Mailboxes
Labels
Side
cover
Mounting slot
Paper stops
Paper
stop
3
Insert the mounting brackets into the slots
on top of the printer, output expander or 5-
bin mailbox. Make sure the 5-bin mailbox is
seated securely.
Note: If the 5-bin mailbox will be the topmost
output option, remove the paper bail
from the bracket on the top cover and
store in a safe place.
4
Attach the top cover to the 5-bin mailbox.
Note: Do not attach the paper bail unless you
are mounting the 5-bin mailbox on the
printer or an output expander.
5
Place the tips of the wire paper bail into the
ends of the plastic bracket so that the bail
curves downward.
The bail rests in the output tray of the
expander below it, or in the printer output
bin.
6
Adjust the paper stops for the paper size
you will use.
If you purchased an output expander or 5-bin mail-
box, you received a sheet of labels. These labels
are provided so that you may label your various
output bins.
The illustration indicates some places where you
may attach the labels: output bin tray, paper stop,
side cover, or wherever best suits your application.
Install Paper Options and Printer 13